Sale - Liquid error (line 70): divided by 0% off
  • Innokin Endura T20-S Starter Kit
  • Innokin Endura T20-S Starter Kit
  • Innokin Endura T20-S Starter Kit
  • Innokin Endura T20-S Starter Kit
  • Innokin Endura T20-S Starter Kit
  • Innokin Endura T20-S Starter Kit
  • Innokin Endura T20-S Starter Kit

Innokin Endura T20-S Starter Kit

Sorry, currently out of stock

This product has been discontinued. If you're after something similar, we highly recommend checking out the Vaporesso Drizzle Fit Kit.


You’re going to love the long lasting & beautiful colored finishes! The Black and Stainless units have a smooth, glossy finish - while the Red and Blue units have a soft-touch, rubberised coating.

The Endura T20-S kit comes with a 1,500mAh internal Li-Po battery. It has integrated safety protection and features ‘Vape while charging’ technology. The tri-color LED power indicator clearly shows remaining power levels and charging status. It stands 132mm tall with an optimized 18 watt output and high-quality 510 connector.


The evolution of the Prism tank continues! The Prism-S is the next generation tank and coil system. Focused on pure flavor and throat hit, this MTL tank provides an exceptional experience in how it vaporizes e-liquid.

The Prism-S coil will let you taste flavors like never before! Just unscrew the cap and fill from the top. Enjoy the optimized draw for just the right amount of airflow and precision vaporization. The Ultimate Flavor Experience, available now! 

Pro Tip: When you are putting your unit together, you need to screw in the coil until it clicks into place otherwise your unit will leak liquid so be sure, make it click!


This starter kit comes with two disposable coils (atomisers), one already installed and ready to fill!

Each coil should last you between 1-3 weeks, depending on your usage. There is no real sudden "cut off" to when you should change coils, but you'll notice the flavour and vapour production start to taper off - really, it's a matter of preference. 

Click here to purchase replacement coils for the T20-S starter kit.

To fill/refill your tank:

  1. Unscrew the top cap.
  2. Fill against the side of the tank, leave a little bit of space.
  3. Drop two or three drops of e-liquid down the center of your new coil, to help get the internal cotton wet.
  4. Screw your top cap back on.
  5. At this point, we recommend you give the tank a few short inhales (without pressing the button) to make sure that the liquid has definitely entered and saturated the internals of your new coil.
  6. Wait 5-10 minutes before vaping.
  7. Done!

To change your coil:

  1. Remove your tank from the battery.
  2. Unscrew the bottom ring from the tank.
  3. Slide your old coil straight out.
  4. Insert your new coil.
  5. Replace the bottom ring on the tank.


In colder climates, your liquid may thicken slightly. If this is the case, we recommend that you leave the new coil to soak in your e-liquid a little longer, and once you start vaping, take small short inhales to ensure that you do not accidentally fire a "dry" coil.


Battery Capacity: REAL 1500mAh
Maximum Output Wattage:18W
Maximum Output Current:6A
Maximum Output Voltage: 3.85V
Clearomizer Resistance: 0.6 Ohm (min.)
Charging: Micro USB DC 5V/0.5A (Micro-USB charging cable included)


1x Endura T20S
1x Prism T20S Tank (0.8ohm)
1x Spare Prism S Coil (0.8ohm)
1x Spare Drip Tip
1x Quick Start Guide
1x Micro USB Charging Cable
1x User Packet

Innokin's instruction pamphlet can be found here.

Customer Reviews

Based on 31 reviews Write a review